Home › Trades › Machinists › Texas
Machinists in Texas: what they earn
Machinists in Texas earned a median $59,180 a year in May 2025, $28.45 an hour. 21,700 people held the job, 1.5 for every 1,000 jobs in the state. That median is 1% above the national figure of $58,750, and Texas ranks 24 of 51 by pay for this trade.
The full wage spread in Texas
| Point | Hourly | Annual | Meaning |
|---|---|---|---|
| 10th percentile | $18.56 | $38,600 | A tenth of the workforce earns less than this. |
| 25th percentile | $22.90 | $47,630 | A quarter earn less. |
| Median | $28.45 | $59,180 | Half earn less, half earn more. |
| 75th percentile | $33.56 | $69,800 | A quarter earn more. |
| 90th percentile | $39.94 | $83,070 | A tenth earn more than this. |
| Mean | $28.98 | $60,270 | The average. Pulled up by the top earners. |
Annual figures are the hourly rate times 2,080 hours, BLS's full-time year. Overtime is inside the survey's earnings but not separated out.
Pay by metro area in Texas
Houston-Pasadena-The Woodlands, TX employs the most machinists of the 24 metro areas based in Texas that BLS publishes, 8,140, at a median $61,280 a year. The best-paid is Corpus Christi, TX at $71,590.
| Metro | Employed | Median annual | 10th pct | 90th pct |
|---|---|---|---|---|
| Houston-Pasadena-The Woodlands, TX | 8,140 | $61,280 | $39,960 | $81,470 |
| Dallas-Fort Worth-Arlington, TX | 4,660 | $59,830 | $40,110 | $81,930 |
| Austin-Round Rock-San Marcos, TX | 1,210 | $59,030 | $41,740 | $77,650 |
| San Antonio-New Braunfels, TX | 750 | $53,190 | $37,660 | $84,130 |
| Longview, TX | 690 | $48,350 | $32,440 | $68,550 |
| Beaumont-Port Arthur, TX | 520 | $59,800 | $44,450 | $103,260 |
| Odessa, TX | 380 | $59,770 | $40,910 | $78,140 |
| Amarillo, TX | 360 | $41,900 | $33,650 | $80,190 |
| El Paso, TX | 360 | $46,880 | $30,480 | $65,650 |
| Corpus Christi, TX | 300 | $71,590 | $42,790 | $100,140 |
| Midland, TX | 270 | $58,800 | $40,060 | $75,220 |
| Waco, TX | 250 | $50,380 | $36,830 | $95,820 |
| Lubbock, TX | 160 | $47,790 | $36,340 | $72,390 |
| Sherman-Denison, TX | 160 | $49,710 | $33,300 | $74,100 |
| Texarkana, TX-AR | 140 | $49,310 | $33,860 | $68,080 |
| Killeen-Temple, TX | 130 | $50,420 | $36,040 | $62,270 |
| Wichita Falls, TX | 130 | $52,790 | $38,450 | $83,890 |
| Brownsville-Harlingen, TX | 120 | $48,970 | $35,560 | $69,050 |
| McAllen-Edinburg-Mission, TX | 110 | $48,230 | $25,510 | $67,080 |
| San Angelo, TX | 100 | $49,610 | $37,960 | $71,820 |
| College Station-Bryan, TX | 90 | $55,560 | $39,070 | $66,420 |
| Tyler, TX | 80 | $58,170 | $35,960 | $76,990 |
| Abilene, TX | 60 | $56,160 | $36,440 | $70,960 |
| Victoria, TX | 60 | $48,420 | $37,500 | $85,690 |
Metropolitan statistical areas as BLS publishes them in the same May 2025 estimates. A metro that crosses a state line is listed only under its primary state, so part of a neighboring state's metro can sit outside this table. Areas outside any metro are not shown.
Texas against its neighbors on the pay ladder
| # | State | Median annual | Employed |
|---|---|---|---|
| 21 | Colorado | $60,200 | 2,800 |
| 22 | Maryland | $59,810 | 1,380 |
| 23 | New Mexico | $59,440 | 690 |
| 24 | Texas | $59,180 | 21,700 |
| 25 | Maine | $59,160 | 1,780 |
| 26 | Wisconsin | $59,110 | 12,700 |
| 27 | Idaho | $58,810 | 1,070 |
The complete ranking is on the Machinists page.
Against the national figure
| Figure | Texas | United States |
|---|---|---|
| Median annual | $59,180 | $58,750 |
| Median hourly | $28.45 | $28.24 |
| 10th percentile, annual | $38,600 | $39,200 |
| 90th percentile, annual | $83,070 | $80,010 |
| Employed | 21,700 | 287,050 |
Apprenticeships in Texas
U.S. Department of Labor records list 53 registered apprentices active in Texas in fiscal year 2024 (October 2023 to September 2024) under the occupation titles DOL maps to machinists (SOC 51-4041). The file's fiscal 2024 records largely stop after February 2024. In fiscal 2023, the latest year the file holds in full, 14 apprentices started; 14 have a starting wage DOL counts, fewer than the 50 a median needs here. Of those who completed that year, 11 have an exit wage DOL counts, fewer than the 50 a median needs.
Find a registered program: DOL's Apprenticeship Finder → · Every state's count and wages for this trade →
Which wages DOL counts, which titles count and how the state is assigned are on the data page.
Other trades in Texas
Electricians ($58,570) · Plumbers and pipefitters ($59,840) · HVAC technicians ($57,760) · Welders ($53,340) · Truck drivers (CDL) ($56,290) · Lineworkers (power-line installers) ($78,940) · Elevator installers ($102,140) · Ironworkers ($52,240) · Sheet metal workers ($54,240) · Carpenters ($48,900) · Brickmasons and blockmasons ($56,410) · Auto service technicians ($48,310) · Diesel mechanics ($58,810) · Heavy equipment operators ($50,460)
See all 15 ranked by pay in Texas.
No state licensing records are sourced here for machinists. The steps into the trade are on the Machinists page. Numbers on this page are the May 2025 BLS estimates, apart from the apprenticeship figures, which are DOL's; see how the numbers are built.